Furnace Replacement

Even the best furnace will eventually need to be replaced. No piece of equipment lasts forever, especially something like a furnace that has to work hard throughout the winter to keep your house comfortable. If you need professional furnace replacement, or furnace installation in a new home, the Berico team is an excellent choice for the project. Berico has served Greensboro since 1924 and carries an A+ rating with the Better Business Bureau.

Replacing a furnace is a big decision, and it’s important to have all the information you need to make the best decision. The sections below cover the signs worth watching for, what goes into choosing the right replacement unit, and what the installation itself involves.

Signs It’s Time to Replace Your Furnace

Most furnaces in the Greensboro area will last around 10 to 20 years, though how long yours lasts depends heavily on maintenance history and how hard it has had to work over the years. Before a furnace simply stops running altogether, there are usually signs that point to the need for a new unit. Some of the common signs that you need to replace your furnace include the following:

• Frequent repairs. This is a big one. If you are constantly calling for furnace repair to get the system back up and running, you are essentially wasting money that could have gone toward the cost of a new furnace instead.
• Performance decline. You may start to notice that some parts of your home are colder than they used to be, even while the furnace is running. This is another indicator that replacement would be a smart choice.
• Rising energy bills. Older furnaces are less efficient than new ones, especially as wear and tear continues to accumulate. So, if you are spending more and more each month on energy to keep your furnace running, it might be time to invest in a new one.

If you’re not sure which of these applies to you, or whether what you’re dealing with is a repair or the start of something bigger, Berico’s furnace repair technicians can take a look and help you figure out which path makes sense.

Choosing the Right Replacement Furnace

Buying a new furnace takes more than matching the one you’re replacing. There are a number of variables to factor into this equation, and proper sizing is absolutely critical for reliable performance. Both oversized and undersized units can cause their own types of problems, from short cycling to rooms that never quite reach a comfortable temperature.

Efficiency matters too. A new furnace’s AFUE rating tells you how much of the fuel it burns actually turns into heat for your home rather than being lost, and a more efficient unit than the one you’re replacing can meaningfully change your winter energy bills, especially if your old furnace has been losing efficiency for years.

This is a big part of why working with the Berico team is such an advantage. The experienced Berico HVAC technicians know how to perform detailed load calculations so you wind up with a furnace that is a perfect match for the needs of your home, your family, or your business.

Equipment Options, Including American Standard

Berico installs furnaces from several major manufacturers, and American Standard is typically the first brand our technicians bring up when walking a Greensboro homeowner through replacement options. American Standard offers furnace models built with efficiency in mind, but it’s one option among several excellent brands. The right choice comes down to your home, your existing ductwork and fuel type, and what you’re looking to get out of the new system.

Furnace Replacement by Fuel Type

The right replacement furnace depends partly on what fuel your home already uses, and partly on whether it still makes sense to stay with that system or make a change.

Fuel Type	What to Consider When Replacing	Berico’s Role
Gas	Efficiency ratings vary widely between models; ductwork condition affects performance	Sizing, installation, and code-compliant connection
Propane	Same equipment considerations as gas, plus ongoing fuel supply	Furnace installation and propane delivery, both handled by Berico
Electric	No combustion components to plan around, but electrical capacity needs to be verified	Sizing and electrical supply verification
Oil	Tank condition and age matter alongside the furnace itself	Furnace installation, oil tank installation, and heating oil delivery

Because Berico also delivers propane and heating oil to Greensboro homes, switching fuel types during a replacement, or simply staying with what you have, can be handled by the same company from the new furnace to the fuel that runs it.

What to Expect During Furnace Replacement

In some ways, replacing an old furnace is simpler than installing one from scratch, since the ductwork, electrical connections, and equipment space are usually already in place. There is still plenty of work to be done, though. The Berico technicians working in your home will confirm that your ductwork is in good condition, verify that everything meets code requirements, remove and dispose of your old furnace, and test all connections before the job is considered done. What you’re left with is a new furnace that works the way it’s supposed to and lets you leave your HVAC headaches in the past.

New furnaces come with manufacturer warranty coverage, which means that if something does need attention in the years after installation, you’re not starting from zero the way you might have been with an aging unit that was already past its expected lifespan.

Rebates and Financing

Berico periodically offers rebates and financing options on new furnace installations, including oil furnace and oil tank projects. Ask about current offers when you get in touch, since availability changes throughout the year.

Furnace Replacement in Greensboro’s Neighborhoods

Greensboro’s neighborhoods went up in waves, and each one is a different story for furnace replacement. McConnell, on the northwest side, has a median year built of 2008, putting many of those furnaces right in the window for a first replacement. The Reserve off Lake Jeanette, built mostly in the 1990s, is further along, with plenty of homes already on their second or third system. Fisher Park, Old Irving Park, Sunset Hills, Westerwood, and College Hill go back further still, so some homes there are on their third or fourth furnace. Knowing where a home falls in that range matters: a first-time replacement is usually the simpler job, while a home several furnaces in may also be due for an update to the ductwork or equipment space around it.

Either way, Greensboro’s winters are short but can still bring hard freezes, and a furnace that’s already struggling tends to show it fastest during the first sustained cold snap of the season.

Get a New Furnace Right Away

The most important part of replacing your furnace is finding the right HVAC contractor for the job. Fortunately, now that you’ve found Berico, that part is settled. Call now, discuss your needs for a new heating system, whether that’s American Standard or another major manufacturer, and look forward to a more comfortable winter than you’ve had in years.

Furnace Replacement Questions

How long do furnaces typically last?

Most furnaces last around 10 to 20 years, though maintenance history and how hard the system has had to work over its lifespan both affect where in that range a specific furnace falls.

How do I know if I should repair my furnace or replace it?

Frequent repairs, rising energy bills, and noticeable performance decline are the main signals that replacement makes more sense than another repair. If you’re not sure which situation you’re in, a Berico technician can look at your specific furnace and repair history and help you decide.

What size furnace do I need?

The right size depends on your home’s square footage, insulation, layout, and other factors, not just the size of the unit you’re replacing. Berico performs a proper load calculation rather than assuming your new furnace should match your old one.

Does a new furnace come with a warranty?

New furnaces typically include manufacturer warranty coverage, which is one of the practical advantages of replacing an aging unit that may no longer have any coverage left.

Will Berico remove my old furnace?

Yes. Removing and disposing of the old unit is part of the furnace replacement process.

Can Berico install a furnace in a new home during construction?

Yes. Berico works with homeowners and builders to plan and install HVAC equipment during new construction, ideally before walls are closed in.

Are there rebates available on a new furnace?

Berico periodically offers rebates and financing on new furnace installations. Ask about current offers when you contact Berico, since they change throughout the year.

What brand of furnace does Berico install?

Berico installs furnaces from several major manufacturers. American Standard is typically the first option our technicians discuss with Greensboro homeowners, but the right brand and model depend on the home and the homeowner’s needs.