Your HVAC system is a big-ticket item and, for you and your family, its proper installation and service is critically important. Not only is your investment at risk from poor service but your family’s health and safety may also be at risk. While some Eden HVAC contractors promise low rates and quick service, it’s important to do your homework. Unfortunately, a lower price sometimes means cutting corners. As HVAC professionals, we find that many common HVAC problems could have been prevented if a system were installed correctly to begin with.

Building Codes

If your system is not up to code, it’s a failure before it’s even been turned on. While it may seem obvious that the proper permits must be secured and current building codes observed when installing any HVAC system, some providers simply don’t stay informed. Inadequately ventilated gas furnaces or incorrectly-sized ducts, for example, are issues we see all too often. Building codes exist for a reason. When they’re not observed, safety, performance and efficiency issues commonly arise.

Safety Issues

Safety issues are common when these types of systems are improperly installed or inadequately considered as changes are made to a home. One example is the build-out of a basement around an existing gas furnace. Many furnaces are originally installed in basements that are unfinished. When a basement is later finished, walls are normally built around the furnace. Eventually, these basement furnaces are replaced with newer, higher-efficiency models, but additional ventilation is not provided to the surrounding space. This lack of air to the furnace can create a dangerous situation for the home’s inhabitants. It takes an excellent HVAC contractor in Eden to understand and anticipate these safety issues, and to make the proper adjustments to ensure your family’s safety.

Right Systems

Today’s HVAC systems have become much more robust and complex than traditional ones. Advancements in the HVAC industry have made it possible to go beyond just heating and cooling, and to address the quality of the air your family breathes. Air filtration systems and built-in humidifiers are just some ways to improve indoor air quality.

Therefore, it’s important to choose the right heating system for your home. But some bargain providers simply don’t have the experience or knowledge to help you make the correct choice. In addition to selecting the correctly-sized system, you will want to consider other factors as well. Be sure to work with an experienced HVAC expert like Carolina Fuels in Eden, NC to help you understand your options.

Heat Load Calculations

When your family’s needs change, your heating system should adjust to meet them. For example, if you add another bedroom or a home office to your home, the new space adds an additional load to your home’s heating and cooling system. Down the road, if you want your HVAC system replaced, you need to hire a provider to reassess your requirements, accounting for any changes that have been made to your home since the original system was installed. This is called a heat load calculation.

Unfortunately, the process is commonly overlooked. Some contractors, when replacing an HVAC system, will simply check the model number of the original system, and replace it with a newer version. To avoid future problems with the new system, make sure to reassess the family’s heating and cooling needs. Carolina Fuel’s highly experienced technicians will take care of all your Eden HVAC needs. Our qualified service and installation teams offer experienced installation, maintenance, and repair for most models of air conditioning systems. Contact us today at (336) 623-9741.

The main purposes of a Heating, Ventilation, and Air-Conditioning or HVAC systems is to provide good indoor air quality through adequate ventilation with filtration and provide thermal comfort. It is very essential to have proper maintenance of your HVAC system regularly, as it helps in dramatically improving the efficiency and saving on your energy costs.

A HVAC system installation is one of the major investments made by homeowners and unfortunately may put off inspections and maintenance until something big goes wrong with their systems. But often people tend to forget that not only regular maintenance will help to avoid expensive repairs and replacements, it can also help save a significant amount of energy costs by ensuring that their HVAC system is performing as efficiently as possible.

The following are the regular maintenance steps that your HVAC contractor in Greensboro can do for you that will further help you to extend the life of your HVAC system.

Regularly Change Your Air Filters

One of the most important cost effective steps is to change your air filters regularly, which will help you reduce your energy costs. HVAC filters are used to help keep dust, dirt and allergies out of your circulatory system throughout the home. Regularly changing these air filters ensures that your HVAC system is running cleaner and more efficiently.

Check your HVAC System Fan Regularly

HVAC system fans, that circulates the air throughout your building, can become loose due to cumulative effects of vibration during the normal operation of your HVAC unit. Thus make sure to check the fans of your HVAC system, whenever you are changing your filters which will further ensure that fans are working properly.

Regularly Oil Your Blower Motor

As per the requirement, keep your fan motor oiled and running smoothly. Depending upon your HVAC blower motor, whether it is sealed or not, keep your HVAC motor oiled regularly.

By having a professional HVAC contractor take care of your HVAC unit for you, you will be able to lower your energy costs, extend the life of your system and lower your maintenance costs. Waiting until something is broken down is not only more stressful but more costly than regular maintenance from your HVAC service provider.

Berico Heating and Air is the top service provider of HVAC for residential and commercial customers in Greensboro, Burlington, Eden and surrounding areas. We serve professional high quality services for any HVAC installation, repair and maintenance needs. Berico Heating and Air can be contacted for your commercial and residential Greensboro area HVAC contractor needs at (336) 273-8663.

Get ready for the winter season by learning about some of the most common furnace problems that homeowners see. You will be able to evaluate a pressing problem fast and know when its time to call your Reidsville heating repair technician for expert help.

Power supply issues is the first thing you should check for when you first encounter a heating problem. If you have gas heat, check whether the pilot light is lit and if not, relight it. If you are not comfortable relighting it, you can call Carolina Fuels in Eden, NC to relight it for you. If it will not light, there may be a gas supply issue.

If you own an electric heater, make sure that the wiring has not come loose. If any components have a power cord, check to be sure it is plugged in. Check your home’s power supply box to see if the circuit that supplies electricity to your furnace has tripped.

An issue with your thermostat could also be the cause of a heating malfunction. If you own a programmable unit, you may have accidentally mixed up weekdays and weekends while programming, making for a cold Saturday morning. Another problem may be with the heat sensor inside thermostat. If the sensor fails, the furnace can not operate properly. Buildup of dust or loose wires within the thermostat may affect its functionality too.

Obstructions may also be hindering your heating system. If you notice that some rooms are cold while others are at a comfortable temperature, your first step should be checking the heat registers. Make sure the vents are open and clear of furniture, rugs, drapes and clothing in the areas that you want to heat. If a vent is still not blowing warm air when the furnace is on, there is a possible obstruction in the ductwork and you should call for a professional to help.

If the overall airflow from your furnace seems weaker than normal, take a look at your air filter. A dirty and dusty filter deters the flow of warm air. Be sure to check it every month during the heating season and replace it when it becomes dirty.

If your furnace makes weird noises, this is a cause for concern. If you hear a squealing sound when your furnace kicks on, that may be due to a worn-out fan motor or belt. Do not try to fix this on your own, a professional is better equipped to handle this problem. A rattling noise may be caused by a cracked heat exchanger. This is the chamber where your furnace burns fuel to convert it into heat energy. If the unit is cracked, it could leak carbon monoxide fumes into your home. Something should be done ASAP for this issue because it could endanger your family.

Some homeowners learn over time how to diagnose heating problems. However, taking a more proactive approach with regular maintenance and repairs keeps your heater running longer.

Contact Carolina Fuels today

A heater repair expert from Carolina Fuels will be happy to answer any questions you have about heater repairs or emergency furnace repairs. We offer free estimates and are available 24 hours for emergencies in the Reidsville, Eden, Brown Summit, Mayodan and Rockingham County areas. Give us a call at 336-623-9741 today.

Thinking of upgrading or improving your heating unit? Hiring a good Burlington, NC heating repair technician is a wise move. You do not want to let a neglected furnace lead to dangerous situations. It’s best to be proactive when it comes to heating repairs and new heat systems.

Not many people understand that cracks in the heat exchanger in a furnace can lead to carbon monoxide leaks into your home. It’s very important to allow a professional handle your heating and furnace repairs and installations in Burlington.

Make sure that when looking for a good Burlington heating repair technician that the company specializes in furnace installation and repairs. Some companies may even offer heating repair and installation discounts. Alamance Oil goes above and beyond to give customers the best service around. Our motto is “Always Dependable” and we stand by it 100%.

It does not matter if you need a quick repair or major heating system overhaul, hiring a professional is in your best interest. Alamance Oil’s technicians and installers are well-trained and educated in heating repairs and installation in Graham. We have a great track record and offer payment plans to help fit within your budget.

The importance of having an correctly and efficiently working heating system cannot be stressed enough. An inefficient furnace can cause a costly utility bill. If you have been calling a technician numerous times to perform furnace repairs, you should probably look into furnace replacement.

A poorly maintained furnace may also pose a safety hazard. You can ease your mind and call a professional Mebane heating repair expert. This is also important if your heating costs have increased over the pass few months or years.

Alamance Oil offers prompt and friendly customer service, and accurate diagnosis of furnace problems. We have technicians who can service all makes and models in the Burlington, Graham, Mebane and Alamance County area.

If you have recently had a new furnace installed, proper use and maintenance will help extend the life of your unit. When dust and other elements accumulate and obstruct the furnace, its efficiency can be reduced. Annual furnace servicing helps to maintain peak efficiency. The need for frequent furnace repairs arises when a service plan is not used.

Taking time to contact a Burlington HVAC professional to inspect your furnace before the harsh winter season is a good idea. With Alamance Oil properly installing and/or checking your furnace, you and your family can stay warm the whole winter season and rest easy knowing you are safe and warm. Give us a call at 336-226-9371 to schedule an appointment with a comfort specialist or for more information about our service plans.

While many people around the country think of the Greensboro, NC area as constantly filled with warm sun and relaxing breezes, residents know that sometimes North Carolina can get downright cold. While there’s hardly any threat of blizzards or below zero temperatures, homeowners in this area need to have a good working heating system. When it’s time to cover the pool and curl up in the recliner, your Greensboro heating system can be as important as the roof over your head if you want to stay comfortable.

Common Types of Greensboro Heating Systems
Usually, homes in the Greensboro area are heated with a forced air system. These systems are generally less expensive to install and run efficiently, forced air is gaining more and more popularity in North Carolina. Forced air systems include oil, propane, and gas furnaces. All are great options for homes in the Greensboro and Guilford County areas.

Heat pump systems are a little less common, but this is because the technology is newer. In these systems, the same ductwork is used for both heating and cooling the home. The outdoor unit will produce both warm and cool air. While it doesn’t have the exact same heating capabilities as a separate furnace, heat pump systems are very convenient and a good choice for creating a comfortable temperature in the mild southern North Carolina climate.

Replacing an Existing Heating System in Greensboro
If your heating system or furnace is malfunctioning enough that you need several visits from the heating repair technician each winter, it may be time to consider a new heating system. Many Heating and cooling companies often have score sheets that help the home owner decide on the best time to repair or replace their heating and cooling systems. Homes using a furnace that is past its useful life should also consider a new furnace, even if it is working okay. Older systems are known for wasting energy, with some running at below 80 percent efficiency. New furnaces can run at more than 95 percent efficiency in some cases, and will end up saving you on utility bills even during a mild winter.

Greensboro Heating System Repair
Repairing heating and cooling units requires years of training and expertise to do right. As a homeowner, your best option for lowering repair costs is not in do-it-yourself repairs, but in prevention. If you see a problem, it’s best to call for heating repair as soon as possible. It is also a good idea to have your heating system inspected by a Berico professional on a regular basis to fix small problems before they get worse, and to identify potential problems that can be inexpensively prevented. The worst thing you can do is let a problem go unattended, as there’s a good chance it will become worse when you need heat the most.