The thermostat is the “brains” of your HVAC system. There are plenty of other components needed for the system to work and effectively heat and cool your home, but if the thermostat isn’t working, the other components just don’t matter. So, this article will take a look at some of the signs that your thermostat needs to be fixed or replaced.

If you would like to work with the leading AC repair company in North Carolina, simply reach out to Berico today to get more information or to schedule an appointment. Berico can complete any type of HVAC service in a timely manner and for an excellent price. You are sure to be impressed with the quality of workmanship and people.

Start with the Basics

You don’t need to be an HVAC technician to notice when something is wrong with your thermostat. In fact, if you just pay a bit of attention to how it is operating, you should be able to spot signs of trouble so you can reach out for help.

As an obvious starting point, if your system simply won’t turn on, it might be that the thermostat is to blame. You should hear the system kick on with the clicking noise when it needs to either heat or cool the room. You’ll know it should be running because the temperature reading for the room is higher or lower than the temperature you have set on the thermostat. If the system just won’t come on even though it looks like it should, your thermostat is one of the first things to check.

On the opposite end of the spectrum, it can also be a sign of a faulty thermostat if your HVAC system won’t turn off when it should. The system should not just run and run without stopping – it should get to the desired temperature and then turn off for a period of time. The calibration may be off when it won’t shut down at the right time, so this is another reason to reach out to Berico for help.

Watch for Short-Cycling

A short cycle in an HVAC system is when the system comes on for just a little bit but then turns back off again. It should run for a little while, even when only a modest temperature adjustment is needed, before turning off again. If you hear it coming on and off excessively, have a professional look at the system to see if the thermostat or another component is causing the problem.

Your Settings Are Lost

One of the nice things about a modern thermostat is that it can remember the settings you want to use for your system and use them over and over again. If you have taken the time to program your thermostat, and then those settings just disappear, something may be going wrong with the unit. It might be possible to reset it and restore proper function, or the thermostat may need to be replaced.

Upgrading your Thermostat

Even if you are not having any problems, updating thermostat can pay for itself.  The industry has come a long way since dial thermostats.  Today you can control your thermostats from your phone, set schedules, and program specific settings all which  help you reduce the cost of operating your heating and cooling systems.  Furthermore, some thermostats are able to help diagnose or prevent problems by notifying your HVAC company.  Similar to your “check engine light” in your vehicle, your thermostat will let you (and your HVAC contractor) know if an issue occurs.

Whether it’s furnace repair, new equipment installation, or any of a number of other important tasks related to your HVAC system, you can trust the team at Berico to be up to the challenge. Call Berico right away to get the help you need.

Taxes are complicated. Whether they are personal taxes or taxes that you pay for your business, it’s always a complex web to make sure you are paying what you owe, but not any more than is legally required. Spending money on your property is one of those areas where the tax waters can get murky, as sometimes you’ll be able to take that money and deduct it as an expense, while other times, it will require you to record it as a capital improvement. So, which one is it when it comes to HVAC repairs?

No matter how your taxes play out, one thing is for sure – you should always work with a trusted HVAC contractor when anything needs to be done on your property. Berico has an expert team with the experience needed to handle any heating and cooling projects, so get in touch today to learn more.

The Answer – It Depends

You probably aren’t surprised to learn that the answer to a tax-related question is that “it depends”. That always seems to be the case with tax issues, and it is the case here. Ultimately, it will depend on what exactly is being done to your HVAC system. Some types of work conducted on the system will usually be accounted for as expenses, while other costs will be capitalized.

As a starting point, you can think of ongoing maintenance to keep the current system running properly as an operating expense. Most likely, these expenses will just be deducted from the income statement in the period that they occurred. For example, if you bring in Berico to complete a routine inspection of the system, or to replace the filters and address any minor issues that have developed through routine operation, those are all likely to be operational expenses.

Shifting to Capital Expenditures

It’s typically when the costs become greater and the work becomes more notable that you will start to think about your HVAC costs moving over into capitalization instead. This is when you have done something to significantly upgrade the HVAC system or made an improvement that is going to allow you to continue to use the system for a much longer time to come. Adding some equipment to the existing system in a way that enhances its performance or gives you a reason to think you can keep using this system for a lot longer, might allow you to use capitalization in accounting.

Always Get the Right Help

These decisions should not be made without the help of a qualified accountant. You want to make sure your financial professionals are involved in such important choices so you can get it right the first time and not run into any trouble later. For a relatively large business, establishing policies for what is expensed and what is capitalized will help to streamline the process and add consistency.

You shouldn’t let tax concerns slow you down when needing A/C repairs in the middle of a hot Greensboro summer. Simply get in touch with Berico today to have the work completed promptly.

It’s easy enough to understand that an efficient HVAC system is better than an inefficient system. When your HVAC equipment operates efficiently, it tends to deliver better results, and it saves you money by consuming less energy. Also, there is the added benefit of reducing the impact of the system on the environment. But how do you know what the ratings mean and what to look for when shopping for an HVAC system? The article below has the details.

For an HVAC company you can trust to deliver outstanding results over and over again, Berico is the only name you need to know. Simply pick up the phone, call Berico to schedule an appointment, and you will be well on your way.

Starting with Cooling

If you are looking at the efficiency of your cooling system, the metric that is relevant to the discussion is SEER. This stands for Seasonal Energy Efficiency Ratio, and it is a number that demonstrates the energy efficiency of a piece of equipment that was designed to cool an indoor space. It can be applied to either an air conditioner or a heat pump.

This scale is designed to be simple for everyone to understand, so what you need to know is this – the higher the number, the more efficient the system. Current standards dictate that all new cooling equipment be rated with a SEER of at least 14 in the warmer states in the U.S. So if you buy a new system, it will be rated at least at a 14, but you could shop for a unit with a higher rating for even better efficiency. Plus 14 SEER may be today’s minimum, but manufacturers now produce HVAC equipment up to 21+ SEER.  Call a Berico representative today who can help you better understand your system’s SEER rating and the potential return on investment for a higher efficiency system.

Remember that if you are using a rather old air conditioner currently, it could be operating with an effective SEER number of well under 10. So, by installing any type of new equipment, even if it only meets the standard of 14, you’ll be dramatically improving the efficiency of the setup.

A Couple of Heating Measures

Things are a little more complicated when it comes to the measurement of heating equipment, but it’s still simple enough to understand. If measuring a furnace that uses oil or gas to heat an indoor space, its Annual Fuel Utilization Efficiency, or AFUE, should be checked. Again here you want a higher number, as the percentage reflected in this measurement shows how much of the fuel is actually converted to heat. Modern equipment can actually perform at a level of 95% or above, which is incredible efficiency, while older units might barely surpass the 50% mark.

There is a separate measure to track the performance of the heating side of a heat pump system. That number is HSPF, or Heating Seasonal Performance Factor, and the minimum rating is 8.2, although you can find products up to 10 on this scale if you want to be as efficient as possible.

Is it time for HVAC repair at your home or business? Do you need HVAC maintenance completed so you can avoid costly repairs later? Whatever the case may be, you are only one phone call away from getting the help you need for a fair price. Reach out to Berico and get started today.

Most of the time, the power grid is pretty reliable, and you can just allow your various pieces of equipment to run without any worries. There are issues that come up, however, and sometimes a surge of power may rush through the system and put your gear in danger. This is why you probably have a surge protector protecting your computer – but what about everything else? A whole home surge protector is the answer.

Berico is the right choice for all furnace repair and other projects in the Triad. Take a moment to call today to get more information about your upcoming project.

What is Whole Home Surge Protection?

This type of system is exactly as it sounds – it provides an additional layer of protection for everything in your house if more electrical current than expected flows through the building. Rather than needing to plug everything into different surge protectors, you can offer coverage to even things that you wouldn’t be able to connect to a standard strip, such as your HVAC system or your refrigerator. Not only that, but you get much better protection from a quality whole home system than you would ever get from a simple plug-in model.

A Great Value

When you compare the cost of having whole home surge protection added to your property against the potential expenses you could incur if equipment is damaged, it’s an easy choice. This type of protection is going to keep some of your most expensive pieces of equipment safe, meaning you won’t be forced to go out and buy a replacement sometime soon after a power event that wasn’t your fault.

Ideally, you would like to get the longest possible useful life out of all of your major pieces of equipment. Nothing lasts forever, of course, but getting even a few more years out of these major home components is a big financial win. With only a modest cost required to have the surge protection installed, you will have gotten great value for your money, and you can sleep a little better at night as a result.

More and More Technology to Protect

Even if all you needed a whole home surge protector for was to keep your big pieces of equipment like HVAC equipment and a refrigerator safe, it would be worth it. But these days, many homes have a list of smart features integrated into the design, and those components need to be protected, as well. You might have a security system that is connected to the electrical grid, along with a smart thermostat and many other pieces including your entertainment equipment. Keeping all of these parts safe is in your best interest, and a surge protection system can do just that.

Whether you need AC repair, furnace installation, or maybe the installation of a whole home surge protection system, Berico should be your first choice. With one hundred years in business and a reputation that speaks for itself, you’ll certainly be in good hands with this team.