Air Balancing: How to Avoid Hot and Cold Spots in your Home

open kitchen and living room spaceDo you experience uneven heating and cooling in your home? It can be frustrating and downright uncomfortable. And it’s probably costing you more in energy as your HVAC system attempts to maintain your desired temperature. This problem can be corrected by your HVAC service in Eden, increasing your home comfort and decreasing your monthly energy bills.

 

Getting to the Bottom of the Issue

What causes these hot and cold spots in your home? There’s a variety of possible causes, and getting to the source of the uneven temperatures is the first step in correcting the problem.

  • Low air flow. Stand under one of your vents while the air is on. Can you feel air coming out? If not, or even if you have to stand on a stool to feel it, you are experiencing low air flow from your HVAC system. Low air flow is most often caused by dirty or clogged filters. Change your filters first. If you don’t feel an improvement in airflow, it may be a mechanical issue instead.
  • Outside air getting in. It could be that outside air is getting into your home through cracks or holes in your walls, foundation, or roof. Air can also seep in around doors and windows that aren’t properly sealed. Insufficient insulation could also be failing to keep outside air out of your home. If outside air is getting in, it lowers the efficiency of your HVAC system and forces it to work harder than necessary to achieve the desired indoor temperature.
  • Your HVAC system is aging. If your heating and cooling system are old it may be starting to fail. Older systems are also less efficient than newer systems, which means they don’t heat and cool as evenly.

Preventing/Correcting the Problem for Optimal Home Comfort

Now that you have an idea of what may be causing the uneven temperatures in your home, here are some solutions to the problem.

  • Change your filters often. If you haven’t changed your filters in a few months, it is definitely time. Replacing dirty filters with new could correct the lack of air flow through your system. Changing your filters often, at least every 3 months, can help prevent airflow issues from ever starting. If filters aren’t the problem, call your HVAC service in Eden to inspect your system for other possible issues.
  • Seal up cracks and upgrade insulation. If you find any cracks or holes where outside air may be getting in, seal them up. Add weather stripping to windows and doors. Upgrade or add insulation if you feel yours may be insufficient. If your home has old windows you can save a lot of energy by replacing them with new insulated windows.
  • Consider replacing your HVAC system. An old HVAC system may be the cause of uneven heating and cooling. Have your system evaluated by a reliable HVAC service in Eden who can make a recommendation about a replacement.

Tired of hot and cold spots in your home?

When you’re ready to have this issue resolved, Carolina Fuels can help. Expert technicians can diagnose and repair the problem so your home will be more comfortable all year round. Call (336) 623-9741.

Safety and Efficiency Tips for your Propane Gas Furnace

Propane is an excellent alternative home heating fuel for furnaces. Clean burning and non-toxic, propane is just as safe as other heating fuels in Greensboro, if not more so. But getting the highest level of efficiency and safety from your propane furnace requires a little bit of action on the homeowner’s part. Follow these tips to get peak performance from your furnace and eliminate safety risks.

  1. Schedule Routine Maintenance. This is always the number one safety and efficiency tip for propane furnaces. Keeping up with maintenance, which means a professional inspection and tune-up once a year, will ensure that your furnace is operating properly. A furnace in disrepair can cause a variety of safety issues from fire risk to carbon monoxide poisoning. A well-maintained furnace will also heat your home more efficiently, using less propane and making your home feel warmer. Always schedule a maintenance appointment towards the end of summer or in the early fall before the weather gets cold enough to require the use of your furnace. 
  2. Keep your Propane Filled Regularly. Running out of propane and even letting the amount of propane in your tank to fall too low can cause a variety of problems and safety issues. A propane tank that is nearly empty has a lot of space for air, condensation, and unwanted moisture to build up inside, which is potentially harmful to the tank itself. A tank in disrepair can leak or lead to other problems. If your tank gets completely empty, there are extra measures that must be taken when it comes to the refill process. An empty tank can become leaky upon refill due to internal pressure issues. Your propane supplier can repair any leaks and provide an automatic delivery schedule for future refills to prevent your tank from running out again.  
  3. Your Propane Tank Should have an Overfill Prevention Device. A propane tank should never be filled completely. There should always be room for the liquid to expand as it warms. Otherwise, the pressure in the tank is too great, which can cause leaks or even an explosion in extreme cases. The overfill prevention device, or OPD for short, ensures that this won’t happen. 
  4. Change your Filters Regularly. Experts recommend monthly, or at least quarterly filter replacement. At the very least you should have your HVAC service replace them twice a year during maintenance appointments. Dirty or clogged filters are one of the biggest causes of inefficiency in your furnace.  
  5. Get a Programmable Thermostat. One of the best things you can do to improve HVAC efficiency is to use a programmable thermostat. You can set the thermostat to call for different temperatures at different times of the day or night, so that when you’re not home, your house won’t have to be as warm, saving a significant amount of propane.  

Berico Provides Furnace Maintenance and Heating Fuels in Greensboro  

To keep your furnace operating efficiently and your propane tank full and in good condition, you need regular service and deliveries from a reliable propane supplier. Berico is a complete home comfort service providing all of the necessary maintenance and products to keep your home comfortable year round. Call (336) 273-8663 to request furnace maintenance or heating fuels in Greensboro 

Ways to Correct Temperature Variations Throughout your Home

adjusting thermostat in your homeDo you experience uneven temperatures around your home? Are some rooms always warm and others always cold? This problem is actually quite common and there are solutions, most of which can be handled by your HVAC service in Greensboro 

Problem: Upstairs is warmer than downstairs. Naturally, hot air rises. If your only thermostat is downstairs, your entire home will continue to heat as long as the downstairs remains cool.  

Solution: Zone heating system. When you have a multi-level home, a zoned HVAC system allows each level to have its own thermostat and duct system so that only the level that needs heat will get it. In most cases (with the exception of very large houses) more than one zone can run off of one HVAC unit.  

Problem: It feels colder near exterior doors or in rooms with large or lots of windows. 

Solution: Add extra or better insulation/weather stripping around doors and windows. If your home has old windows, consider upgrading to newer insulated windows. 

Problem: Furnace cycles on and off but the ideal interior temperature is never achieved. This is typically due to an incorrectly sized unit.  

Solution: Have an expert HVAC service in Greensboro recommend and install the correct size unit for the square footage of your home. 

Problem: One room seems to stay unusually cool. This could be caused by leaky or incorrectly installed/sized ductwork.  

Solution: Have the ductwork inspected and repaired or replaced by a professional.  

Problem: Low air flow from vents, likely due to clogged filters.  

Solution: Replace dirty filters with new to improve airflow.  

Problem: Low air flow due to closed or blocked vents. 

Solution: Make sure all vents are open and there is no furniture or curtains blocking them. 

Problem: Rooms that have been added on, such as sunrooms or basements that have been finished are not currently part of the central air system in your home.  

Solution: Ductless mini-split HVAC units provide heat and air conditioning to just one room at a time. They are easy to control and can be used only when needed. 

 

Having Heating or Cooling Issues in your Home? Start with HVAC Service in Greensboro 

If your home seems to be heating or cooling unevenly, and you’ve checked your filters, vents, and insulation, the next step is to contact your HVAC service in Greensboro for a thorough inspection of your existing air system. It’s possible that a simple cleaning and tune-up of your furnace and air conditioner is all that’s needed to even out the comfort level in your home. Twice yearly maintenance is recommended by HVAC experts, one appointment in the fall for your home heating system and one in the spring for your home cooling system, whatever type you have. Whether it’s a central air system, a heat pump, a geothermal unit, or other, routine maintenance keeps it running smoothly and efficiently. In some cases, it may be necessary to replace or upgrade your current system. Berico can handle all of your HVAC needs and restore your home to an even comfort level throughout. Call (336) 273-8663 to schedule an appointment 

 

10 Ways to Cut your Hot Water Energy Bill

shower head spraying waterHot water may not be an official necessity, but it’s a modern convenience that is pretty hard to live without. If you enjoy warm showers, clean dishes, and white laundry loads, hot water is important. Your water heater is probably what uses up a significant portion of your home energy after your furnace, especially during the winter. Whether you have an electric or gas water heater, there are ways you cut your hot water energy bill back a little bit or even a lot, depending on how far you’re willing to go toward conservation. Carolina Fuels, a reliable company offering air conditioning and furnace repair in Eden as well as delivery of many types of heating fuels, suggests these 10 ways to cut your hot water energy bill.

 

    • Take shorter, cooler showers. This one is hard, because a hot shower is such a luxury, especially when it’s cold outside. By shortening the length and temperature of your showers you can help your water heater use less energy. And besides saving energy, there are other reasons a shorter, cooler shower is beneficial. It’s also better for combating dry skin that so often plagues us during dry, cold winters. It also helps to prevent dry scalp issues that can lead to dandruff.
    • Replace shower heads and faucets with low flow models. A low flow shower head reduces the amount of water used during each shower. Low flow faucets can conserve a lot of water too in the kitchen and bathrooms.  
    • Do most of your laundry in cold water. When it comes to your multi-color loads, there’s really no advantage to using hot water and it could cause your colors to run. When it comes to white loads, if you use bleach, wash in hot water but rinse in cold to save some energy.
    • Set your water heater to a lower temperature. Aim for around 120 degrees and your water heater will save a lot of energy it would normally expend to heat the water to a higher temperature and preserve that temperature in the holding tank.
    • Run your dishwasher less often. Wait until you have a full load of dishes before running your dishwasher.
    • Fix leaky plumbing. Letting a faucet drip can waste an amazing amount of water, and sometimes it’s the hot water that’s leaking, meaning your hot water heater is working overtime.
    • Add insulation to your water heater. Water heater insulation can be purchased and applied on your own, but make sure you follow the directions to avoid problems. Consider having a professional apply the insulation.
    • Get a new water heater. Upgrading to a new energy-efficient water heater will save you a lot in energy costs. Especially if you purchase an on-demand or tankless water heater.
    • Get a new dishwasher. An older dishwasher will use much more water than a newer one will. Newer dishwashers also have more advanced heating elements so that it self-heats and doesn’t require as much hot water.
    • Get a new washing machine. A high-efficiency washing machine will also use less hot water when you do need to run a warm water load. 

Call Carolina Fuels for Water Heater and Furnace Repair in Eden

If you need a professional to evaluate your water heater’s condition and energy usage, Carolina Fuels can help. In addition to furnace repair in Eden, Carolina Fuels provides a wide range of energy audit services. If you currently have an electric water heater, you may find that you can save the most money by switching to a propane water heater. Call Carolina Fuels to find out how you can save energy today: (336) 623-9741.

Top 8 Cost Effective Energy Efficiency Investments for Your Home

When it comes to saving energy, the debate is always about which energy-saving improvements are actually worth the money. Can you actually save money with energy efficiency upgrades? The key is choosing items that are the lowest cost up front that can save you the most in the long run. A lot of the best investments are related to home comfort, such as heating and air conditioning. Your HVAC service in Burlington can make the best recommendations, such as these top 8, arranged from lowest to highest cost. 

  1. Dishwasher Cleaner. A clean dishwasher operates much more efficiently than a dirty one. Dishwasher cleaner packets are just a few dollars. Put one in the detergent compartment and run a normal cycle while the dishwasher is empty.  
  2. Weather Stripping. Like insulation, weather stripping around doors and windows prevents cold air from getting in during the heating season and hot air from getting in during the cooling season, allowing your HVAC system to operate more effectively. Weather stripping starts at around $5.  
  3. Light Bulbs. Replacing your lightbulbs with fluorescent bulbs can save you energy and money. The bulbs last anywhere from 4-10 times longer and a 4 pack averages less than $10.  
  4. Insulation. Purchase a roll at any home improvement store for around $15 and save hundreds each year in heating and cooling costs. 
  5. Low Flow Shower Heads and Faucets. You can conserve a lot of water using low flow shower heads and faucets. Your water bill can be reduced as well as the cost of water heating. A low flow showerhead can be purchased for as little as $20. 
  6. Programmable Thermostat. Starting around $50, a programmable thermostat allows you to preset different temperatures for specific times of the day. Your HVAC system won’t have to work as hard or run as often when no one is home.  
  7. Ceiling Fans. By installing ceiling fans in many of the rooms in your home, you can set your thermostat to a higher temperature when the weather is hot and still feel comfortable, or avoid using your air conditioning altogether. You may find ceiling fans as low as $60. 
  8. Tankless Water Heater. Also known as an on-demand water heater, this has the highest initial cost of all these items. The jury is still out on whether or not tankless water heaters are worth the money, but you can definitely save energy by not heating a tank full of water that may or may not be used. You also gain the advantage of always having hot water when you need it.  

The Next Best Energy Saver is Preventative HVAC Service in Burlington 

It’s not an upgrade, but routine maintenance for your HVAC system can save a lot of energy. A properly operating furnace and air conditioner will run more efficiently and use less fuel and electricity. You’ll also save money by avoiding expensive repairs and emergency or after-hours fees. Call Alamance Oil HVAC service in Burlington to schedule a routine maintenance appointment: (336) 226-9371. 

Why is My AC Leaking Water?

When you notice water leaking anywhere in your home, it can be alarming. When the water is coming from your air conditioner it can be both alarming and puzzling. There are actually some very common reasons your AC may be leaking water, and in most cases, it can be easily repaired. But before you call for AC repair in Burlington, you may want to have a general idea of what’s going on with your air conditioner. 

Common Causes of Water Leakage in Air Conditioners 

  • Clog in the condensation drain. As warm air is converted to cool air, condensation takes place, meaning moisture is created. Excess moisture should drain out through the condensation drain, unless there is a blockage of some kind.  
  • Lack of air flow. If filters are clogged or vents are closed or blocked it can decrease the amount of air moving through your air conditioner. Without proper air flow, excess moisture can be created and leak out. 
  • Broken condenser pump. When excess moisture builds up in your AC unit, there is a pump that gathers the water and sends it out through the condensate drain. If the pump is malfunctioning, the water could be leaking inside. 
  • Poor sealing and insulation. If your air conditioner isn’t sealed well or doesn’t have the proper insulation, hot air can get to the condenser coil, which creates excess moisture that may leak out. 
  • Uneven installation of the outdoor unit. If your outdoor AC unit is not on a level surface it can cause excess moisture to be created or to fail to drain properly.  
  • Damaged drain pan. The drain pan holds excess moisture, so any leaks in it will cause the water to leak out. It is common for the drain pan to get old and rusted after holding water on a constant basis.  
  • Low refrigerant. When the refrigerant level in your system gets low it can cause it to freeze. Then when it warms again it melts, causing water leakage. 

What Should You Do if your AC is Leaking? 

If you see water around your air conditioner and you’re sure that’s where it’s coming from, not a separate plumbing issue, take the following steps. 

  1. Turn off your AC. The only way to keep the problem from getting worse is to turn off your air conditioning system.  
  2. Soak up the water. Use something to soak up the water, such as old towels or paper towels, to prevent any water damage to the interior of your home.  
  3. Check all of your filters and vents. Make sure your filters are not too dirty or clogged. Make sure all vents are open and unblocked. If everything looks to be in order, move on to step 4. 
  4. Call for AC repair in Burlington. At this point, you will need the help of an HVAC professional who can diagnose and repair the problem. Alamance Oil is a reliable source for AC repair in Burlington and the surrounding area. A certified, trained technician will have your air conditioning repaired and operating properly as soon as possible.  

If you’re experiencing leaking water from your air conditioner, call Alamance Oil today: (336) 226-9371.

How to Test your Indoor Air Quality

well ventilated living roomDo you ever wonder about the quality of the air inside your home? Surprisingly, the air inside your home likely contains more pollutants than the air outside. Perhaps you’ve never considered it before. Maybe you have but you don’t know how to go about testing the quality of your air. It’s certainly something worth looking into, for your own health and the health of your family and pets. Your central air system is key to indoor air quality, so one of the best places to start is with your Greensboro HVAC service. 

Start with an HVAC Inspection and Tune-Up to Improve Indoor Air Quality 

Before you even bother with testing the air quality in your home, first call your Greensboro HVAC company for an inspection and tune-up. A complete HVAC inspection and tune-up should include: 

  • Furnace or Heating System(s). If you have a furnace that runs on natural gas, propane, or oil, it creates carbon monoxide as a byproduct of burning fuel. A properly operating system will produce minimal amounts of carbon monoxide and vent it outside of your home. An inspection will reveal any problems that could cause carbon monoxide to be present in your home. A tune up will fix any of these problems.  
  • Air Conditioner(s). Air conditioners are typically electric, which means they don’t produce carbon monoxide, but they can be the cause of other air pollutants such as mold and mildew. Mold and mildew can grow inside of air conditioning systems that are not properly controlling humidity, and those major allergens can cause all sorts of health problems. An inspection will reveal any mold or mildew growth and a thorough cleaning will remove it.  
  • Ventilation. The ventilation for your HVAC system plays a big part in the removal of carbon monoxide and the prevention of mold and mildew growth. The ductwork and other parts of the ventilation system need to be inspected and repaired if necessary to prevent indoor air pollution. 

Indoor Air Quality Tests: Which is Right for You? 

There are do-it-yourself kits for various air pollutants as well as professionals who will come and test your air. Typically the do-it-yourself kits are less expensive but may not be as reliable. If cost is a factor for you, it can be helpful to determine what you should test for, since many of the DIY kits only test for one particular air pollutant. Some of the typical household air pollutants are: 

  • Volatile Organic Compounds (VOCs). These are chemicals found in household cleaners and other items you may keep in the home. One example is formaldehyde, a known carcinogen.  
  • Lead. Typically found in older homes (before 1978) from paint, or in homes near highways where leaded gasoline pollution is possible.  
  • Radon. A radioactive gas that occurs naturally within the earth can seep into your home from the ground through cracks in your foundation. Most homes have radon testing before being built or sold, but if you’ve been in your home for many years it would be wise to test again.  
  • Allergens. Dust mites, pet dander, mold, and mildew are the most common allergens that may exist in your home air.   
  • Bacteria. Some harmful bacteria can build up in your air and become highly concentrated so as to cause health problems.  
  • Carbon Monoxide. As mentioned above, carbon monoxide typically comes from your furnace or any other gas appliance you may have.  

When purchasing or ordering tests, only choose the ones for the air pollutants you think could be the problem in your home. For example, if you don’t have any gas, propane, or oil appliances, you probably don’t have a carbon monoxide issue. If your home was built in the 1980s or later, you probably don’t have an issue with lead.  

Call Berico, your Greensboro HVAC expert, to make sure your home’s air system isn’t the cause of poor quality air in your home: (336) 273-8663. 

Why is My Heating System Clicking?

Have you started noticing a clicking sound coming from your heating system? Clicking could indicate any number of things. Determining the cause depends on a few factors, such as the type of heating system you have, the age of your system, and the energy source. For an accurate diagnostic and furnace repair in Greensboro, it’s best to call a reputable HVAC (heating, ventilation, and air conditioning) service. Consider the following possibilities and then contact Berico for service. 

Possible Sources of a Clicking Sound in your Heating System 

  • Pilot Light. If there is a problem with the pilot light, whether it is unable to light or stay lit, you may hear a clicking sound as the system attempts to relight the pilot. 
  • Bearings. Most heating systems have a motor, and every motor has bearings that will eventually wear out or become dirty. When the bearings are worn or dirty they can make a clicking sound that may be loud enough to notice. 
  • Inducer. A fan or blower is an important part of older oil furnaces, used to expel smoke and fumes from the burning oil. It’s called an inducer, and if this part becomes dirty or loose it will make a clicking sound.  
  • Gas Valve. If you have natural gas or propane, you may hear a sporadic clicking sound with no discernable pattern. This indicates a problem with your gas valve, which can only be handled by your gas company. Do not call your HVAC company for furnace repair if you suspect there is an issue with your gas valve, line, or meter.  

Likely Causes of the Problem 

  • Age of your System. If your heating system is older than 15-20 years, it may be showing signs of age. Extra noises are often an indication that your old furnace needs a tune up or possibly replacement.  
  • Wear and Tear. Over time certain parts of your heating system may start to wear out from constant use and movement. Worn out parts may make some noise, alerting you to the possibility of a problem.  
  • Lack of Maintenance. The most common cause of unusual or increased noises coming from your heating system is lack of maintenance. Your furnace will get dusty and dirty from use, soot will build up, parts will wear out, and lubrication will dry up. These are all problems that regular maintenance can solve. You can prevent heating system issues, extend the life of your system, and save energy by keeping your system operating more efficiently.  

Call Berico for Furnace Repair in Greensboro and the Surrounding Area  

Don’t ignore strange noises coming from your heating system. Call your trusted HVAC company for furnace repair in Greensboro before the problem gets any worse. A minor issue left unattended can become a major problem that could lead to expensive system replacement instead of an easy, affordable repair. Call Berico today for furnace repair and maintenance: (336) 273-8663.

Is a Smart Thermostat Right for My Home?

ThermostatAlmost everything is “smart” these days with smart phones at the center of personal technological devices. Even your home’s heating and cooling system can be controlled from your phone when you use a smart thermostat. There are many benefits to upgrading to a smart thermostat, so consider these when deciding whether or not a smart thermostat is right for your home. Your HVAC service in Burlington, Alamance Oil, can install a smart thermostat in your home if you decide to make the switch. 

A Smart Thermostat Offers Many Benefits to Homes 

Homeowners can enjoy many benefits from the use of a smart thermostat to control indoor comfort.  

  1. Save energy. When your home is unoccupied, it is not necessary for your HVAC system to maintain the same temperature as it would when occupied. Save energy by programming your smart thermostat to raise or lower the temperature when no one is home. 
  2. Save money. When you save energy, you save money, which helps your household budget by lowering your monthly bill.  
  3. Convenience. With a smart thermostat, you can enjoy the convenience of being able to control your HVAC system from a distance, 24/7. Override your programmed settings when it turns out you will be home due to weather or a holiday, all from your phone. Forgot to change your thermostat before leaving on vacation? No problem, as long as you have your phone with you 
  4. Comfort. The smart thermostat allows you to change the temperature right before you arrive home so that you can maximize your comfort even with an irregular schedule. It also allows you to turn up the heat before you get out of bed in the morning. 

With all of these benefits, the initial cost of a new smart thermostat will be worth it and will eventually pay for itself in energy savings. 

Get a Smart Thermostat Upgrade from the Best HVAC Service in Burlington: Alamance Oil 

There are many reasons it’s wise to have your new smart thermostat installed by an experienced, reliable HVAC service in Burlington. 

  • Not every smart thermostat is compatible with every HVAC system. Certain HVAC systems will work with certain thermostats. Let your HVAC company recommend a compatible thermostat for your home or office.  
  • Proper installation is crucial to proper operation and energy savings. For your smart thermostat to give you optimal energy savings, installation is keyEach technician at Alamance Oil is trained to know how to do the job right so that you can get the most from your new thermostat.  
  • Your HVAC technician can teach you how to program and use the new thermostat. After it’s installed, your technician can walk you through your new thermostat and teach you to program it both in your home and from your phone.  

When you’re ready to upgrade your thermostat, use the HVAC service in Burlington you can trust. Alamance Oil has decades of experience with heating and cooling systems. Always on the cutting edge of technology in HVAC equipment, Alamance Oil can easily install a smart thermostat in your home. Alamance Oil can also keep your thermostat and HVAC system operating efficiently with regular maintenance visits. Call (336) 226-9371.  

Is My Propane Tank the Right Size?

Propane tanks come in a variety of sizes. A home or business should have a tank that is the appropriate size for the structure’s typical usage. Your propane supplier in Burlington can recommend the right size tank for you by simply asking some questions about your home or business and appliances. Here’s a general overview of the sizes of tanks and the usage they support. 

Small: 120-325 Gallons 

Designed to support a few appliances, this small tank may be all you need if your propane usage is minimal. If you need propane for your stove, clothes dryer, fireplace, water heater, or any combination of two or three of these, a small tank is probably big enough for your home. These tanks are sometimes upright and other times horizontal, depending on your storage space 

Medium: 500 Gallons 

If you’re planning to heat a small home or run more than three household appliances on propane, you’ll probably need a medium tank that holds up to 500 gallons. Depending on the square footage of your home, this medium-sized tank won’t have to be refilled more often than normal. Your propane supplier in Burlington can give you a good idea of whether or not this tank size will be sufficient. 

Large: 1,000 Gallons 

When you need to heat a larger home and have multiple appliances running on propane, a 1,000-gallon tank will most likely work better for you. Refills should be frequent enough but not so often to become a nuisance. You’ll have the freedom to run your furnace, fireplace, range, dryer, water heater, and more all from one tank. A small business may be able to operate on this size tank.  

Extra-Large: 1,450-1,990 Gallons 

Need a commercial grade propane tank? Businesses and larger buildings may likely require an extra-large tank that holds between 1,450-1,990 gallons of propane. If you need to run several large appliances on propane, you’ll likely need an extra-large tank. This is one of the largest tanks available. If you require more propane than what an extra-large tank will hold, you may need multiple tanks.  

Other Factors Affect Propane Tank Size Recommendations 

When choosing a propane tank size, there are a few other factors to consider besides the square footage of your home and the number of appliances you have that use propane. These include 

  • Climate. The weather in the area where you live or where your business exists makes a difference in the amount of propane you will require for heating.  
  • Storage space. If you have limited storage space, it may limit the size of propane tank that will fit on your property.  
  • Price and budget. If you’re just starting out on propane and your budget only allows for a small tank, you can upgrade later when prices and budgets change.  

Your propane supplier in Burlington, Alamance Oil, can help you determine what size propane tank you need. Sign up for automatic deliveries so you’ll never run out. Call (336) 226-9371.